Free Consultation* Imported Interior Materials
soundproofing foam
soundproof ceilings
fabric wall panels
acoustic consultants
foam sound proofing
NOISE S.T.O.P. FABRISORB™
Interior designing


Decorative Fabric Wrapped Custom Acoustical Wall Panels
Edge & Mounting Options




















CURVED & RADIUS WALL PANELS

EDGE TREATMENTS
Curved and Radius Wall Panels Curved panels and radius corners offer additional design options and add dimension to any interior space. Panel Edge Treatments Chemically Hardened, Metal, Wood, or Soft

ADHESIVE MOUNTING

MAGNETIC FASTENERS
Adhesive Mounting Panels are applied with resin hardened spots on the back. A 2″ diameter dab of construction adhesive is then applied to the spot and applied to the wall. Temporary support is required to avoid slippage. magnetic fasteners The magnetic fastener is applied to the panel before shipment. Permanent support is required

HOOK & LOOP FASTENERS

CONCEALED SPLINES
Hook & Loop Fasteners The loop side of the fastener is applied to the panel at time of shipment. The hook side is attached to its mate, and when installing, the tape backing is removed and the panel is positioned on the wall. Permanent support is required. Concealed Splines Panels with concealed spline attachment are provided with kerfs along the edges of the panels. The spline then inserts into one panel and is mounted onto the wall. Adjoining panels are inserted into the remaining half of the spline.

MECHANICAL CLIPS

IMPALING CLIPS
Mechanical Clips The panel clips are mounted onto the panels at the time of shipment. The wall clips are installed on the wall at the location established by the position of the panel clips or wall bars. Impaling Clips The impaling clips are screwed directly to the wall with the prongs extending outward. The glass fiber acoustical panel is positioned and pressed firmly onto the clip. Locking Adhesive is recommended with this clip mounting.