Free Consultation* Imported Interior Materials
soundproofing foam
soundproof ceilings
fabric wall panels
acoustic consultants
foam sound proofing
Acoustyceil - Metal Ceiling Tiles


ACOUSTIC PRE-PAINTED GALVANISED STEEL PERFORATED CEILING TILES

Acoustic Pre-painted Galvanized steel perforated ceiling tiles of size 600mm x 600mm (Nominal) having thickness of 0.45mm Pre-painted white colourwith backing paint on the other

Acoustic PPGI tiles are compatible with ALL T-GRID systems, and Perforated G.I. tiles have black nonwoven acoustic fabric on the rear side with 0.7 NRC(with Sound Tex).

Perforation : 2.4mm dia. With centre to centre distance of 5mm having open area of 20%

ACOUSTIC PRE-PAINTED GALVANISED STEEL PLAIN CEILING TILES

Acoustic Pre-painted Galvanised steel plain ceiling tiles of size 600mm x 600mm (Nominal) having thickness of 0.45mm Pre-painted white colourwith backing paint on the other side. It is compatible with all T-GRID systems.

Both perforated and plain has following specifications

Suspension: 15mm / 24mm – T-Grid System

Suspension System shall be T-Grid system consisting of Main Runner 3000mm, Cross Tee 1200mm and 600mm, Wall Angle 3050mm.

Suspension Method (For both 15mm / 24mm T-Grid system)

Main Runners are suspended at every 1200mm C/C by means of G.I. wire of 2.5mm diameter (or 4mm rods with butterfly clips) at every 1.20m and not more than 150mm from the spliced joints of Main Runner.

1200mm Cross Tee is attached to the 2 Main Tee section and then the 600mm cross Tee is connected between the 1200mm cross Tees.

Interior Acoustical

ACOUSTIC PRE-PAINTED GALVANISED STEEL CLIP IN PERFORATED CEILING TILES

Acoustic PPGI perforated ceiling tiles of size 600mm x 600mm having thickness of 0.50mm Pre-coated white colourwith backing paint on the other side.

Perforated PPGI tiles have black nonwoven acoustic fabric on the back side with 0.7 NRC (with Sound Tex). Acoustic PPGI Clip In tiles are to be installed using 0.5mm thick Galvanized Spring Carrier which is suspended at every 600mm using holder clip and 2.5mm / 4mm G.I rod.

Perforation : 2.5mm dia. With centre to centre distance of 5mm having open area of 20%

Fire Performance : Metal Ceiling Tiles meet a variety of fire test classification which includes Class 1 spread of flame as per BS 476 – Part 7. Further metal tiles confirms BS 476 - Part 6 for fire propagation and meet building regulation for Class O.

Interior designing

T-Grid Ceiling Suspension System

T-GRID – 24/15 MM SYSTEM

Material: Double Web Hot Dipped Galvanized Steel Profile with Steel Capping and baked acrylic paint over Hot Dipped Galvanized Steel, with zinc coating.

T-GRID – 24MM SYSTEM - HEAVY DUTY

Material: Double Web Hot Dipped Galvanized Steel Profile with Steel Capping and baked acrylic paint over Hot Dipped Galvanized Steel, with zinc coating

24/15MM 24MM SYSTEM - HEAVY DUTY
sdv; sv sdf

Cross Tees will have over ride at each end for clean look.

Main Runner to be hung at every 1200mm

Interior Manufacturers